Roche Accu-Chek Active Manual do Utilizador descarregar pdf (Página 44)

씰 Hold the test strip so that the application area and arrows are

facing upwards. Gently push the test strip in the direction of

the arrows into the test strip guide

➃

of your Accu-Chek Active

monitor, until you hear it click into place.

Inserting the test strip automatically puts the monitor in Test Mode.

Please remember that your Accu-Chek Active monitor automatically

turns off after about 1–2 minutes of non-use (i.e. when no button

is pressed). If this happens, remove the test strip and repeat the

procedure described above with a new test strip.

Now watch the display.

씰 Remove a test strip from its container. Close the container

immediately. The cap contains a drying agent which ceases to

function if the container is left open, rendering the test strips

unusable.

씰 Check the round control window on the back of the test strip

against the colour scale printed on the test strip container.

The colour of the control window must match that of the

colour interval at the top (0 mg/dL / 0 mmol/L).

If the test strip shows a different colour, do not use it.

6.3 Quality control test procedure

015134 AccuChek Active_Eng.indd 84-85 12.08.2004, 14:54:36

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 70 71

Sem comentários

Roche Accu-Chek Active Manual do Utilizador Página 44