Roche ACCU-CHEK Inform II Manual do Operador descarregar pdf (Página 29)

Powering Up and Entering an Operator ID

Enabling/disabling the RF card If the unit is equipped with an RF card, you can temporar-

ily enable or disable this functionality as required.

The RF card is automatically reactivated the next time you

power on the meter. You can then disable it again tempo-

rarily, if required.

If the RF card is activated, the (RF OFF) icon is dis-

played as a button in the Power Up screen.

■ To temporarily disable the wireless network

connection, touch (RF OFF) in the Power Up

screen. The icon then changes to (RF ON).

■ To temporarily enable the wireless network

connection, touch (RF ON) in the Power Up

screen. The icon then changes to (RF OFF).

The RF ON/RF Off button always displays the option you

currently have. The current communication status is dis-

played in the status bar (bottom line) of the display in all

menus and screens.

■ The icon is displayed, if the RF card is enabled.

■ The icon is displayed if the last attempt to

communicate with the data management system

was successful and was terminated according to

the communication protocol.

■ The icon is displayed if the last attempt to

communicate with the data management system

was not successful or was unintentionally

terminated. If this icon persists, contact your system

administrator. Ignoring this information may lead to

a Download Lockout (if configured, see page 33).

WARNING

If you suspect that running the RF card is harming the

patient or affecting other devices, you should carefully

reassess the appropriateness of continued use of the

WLAN functionality of the Accu-Chek Inform II system

using the guidelines of your facility.

Contrast

Power Up 12:48

03/16/10

Kontrast

Start 12:48

16.03.10

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 159 160

Sem comentários

Roche ACCU-CHEK Inform II Manual do Operador Página 29